IMPRESSION

TW 28 1.1 inch silk dome tweeter

28 mm CCAW single layer voice coil combining light weight, stability at lower frequencies and total absence of musical transients compression.

Extremely powerful custom N38 “H-grade” Neodymium magnet providing 1.37 T*m in the magnetic gap for superb dynamic response and very low distortion in the whole frequency range.

Exclusive air-loading system resulting in a resonance frequency below 900 Hz, for filter set-up starting as low as 2.0 kHz - 12dB/Oct.

30 mm natural silk dome optimized with extensive material characterization, laser vibrometer scanning and Finite Element Analysis methods for a smooth and extended response.

Frequency response up to 26 kHz optimized for off-axis installation.

Full solid metal construction structure with each part exclusively designed and produced for the Impression S3 system.

FEM (Finite Element Method) optimized faceplate and front spokes for an improved dispersion pattern.

MR 100 4 inch Midrange

25 mm mobile voice coil in CCAR (Copper Clad Aluminum Ribbon) wound with flat wire to maximize the force factor and heat dissipation.

Aluminum demodulation ring which linearizes the high excursion intermodulation distortion, canceling any sound colorations.

N38 "H-grade neodymium magnet included in the voice coil to obtain superior control of the mobile crew and superior thermal stability.

Motor geometry designed using finite element simulation software to optimize efficiency by concentrating the magnetic field in the gap.

Membrane made of Carbon & Glass fiber hybrid weave, a light but low distortion material that frequency response is very flatly

Membrane geometry designed by simulation software to obtain homogeneous directivity.

Optimized cone/surround break-up with extensive simulations to linearize the response at medium frequencies.

Basket made of a single piece of die-cast aluminum with four pairs of spokes for maximum rigidity without slowing down the air flow.

Suspension and spider with very high excursion, optimized with simulations of the multi-physical behavior of the speaker.

MB 180 7 inch midbass

38mm mobile voice coil in CCAR (Copper Clad Aluminum Ribbon) wound with flat wire to maximize the force factor and heat dissipation.

Low inductance of the mobile voice coil to optimize the emission in medium-high band (2-3 kHz).

N48 “H-grade” neodymium magnet with superb thermal stability to guarantee an optimal dynamic reserve in every situation.

Magnetic group geometry designed using finite element simulation software to maximize efficiency by concentrating the magnetic field in the gap.

Membrane geometry designed by simulation software to obtain homogeneous directivity.

Membrane geometry designed using simulation software, to obtain a smooth emission over all the listening angles.

Basket made of a single piece of die-cast aluminum featuring four pairs of spokes to optimize heat transfer, nullify turbulent airflows and ensure maximum structural rigidity.

Hi-excursion suspension and spider, optimized with simulations of the loudspeaker multi-physical behavior.